Witch Fire And Potrero Fire

[mike]

Anyone know what frequencies and talkgroups are being used on these incidents Any help would be gladly appreciated

[Rescue Pooh]

CDF CMD 1 for the Witch Fire
CDF CMD 2 for the fire in Potrero
Also CMD 7, TAC 11, EMA CMD's and TAC's and SMA CMD's and TAC's

[N6ATF]

Satellite imagery of the fires (not fantastic)
http://www.ssd.noaa.gov/PS/FIRE/fires-sw.html

UT's estimated fire burn/evac map
http://media.signonsandiego.com/fires/

CHP CAD is getting slammed
Lost the bookmark for the CDF CAD
Ventura County CAD has 60 units on scene ATM for the Santa Rosa Valley fire which started at 1035 today http://38.101.117.146/fireline/index.html

And here's an article about the multiple fires in SoCal
http://www.disasternews.net/news/articl ... cleid=3482

Satellite fire detector (which was operational the day the fires started, but not anymore!!!)
http://www.firedetect.noaa.gov/viewer.htm

[BrianStark]

Anyone know what frequencies and talkgroups are being used on these incidents Any help would be gladly appreciated

On the RCS system, Fire air was active earlier this evening. Mutual aid cmd 3 and mutual aid tac 4 have had some traffic. I heard traffic on a calcord frequency earlier. El Cajon CHP talkgroups have been active as well. Of course, there is traffic on multiple CDF frequencies.

To monitor the fire, my BCD396T is scanning the CDF frequencies that are listed in the Southern California Frequency Directory book and select sets of talkgroups from the RCS and City of San Diego systems.

I hooked up my scanner to ARC396 before going to bed, and as I am checking it right now in the early morning hours, I see that the following CDF frequencies have been active during the night:

151.1900 - CDF CMD 10
151.1900 CTSS 131.8 - MVU L
122.9 - Victor Net 2

Brian

[PStuart]

Anybody have any info on evacuations in the Chula Vista area? Whats the name of the fire thats threatening Chula Vista?

[N6ATF]

Harris Fire, MANDATORY evacs of eastern Chula Vista per SignOnSanDiego

[mike]

There was a fire in San Ysidro.

[BrianStark]

Anyone know what frequencies and talkgroups are being used on these incidents Any help would be gladly appreciated

For CDF frequencies, CDF CMD 5 (151.37) and 136 LNP (170.075) are active today with Spanish speakers -- my Spanish is pretty good, but they were talking very quickly for me to follow everything. I did catch some references to Escondido though. I was monitoring from Mt. Soledad for a brief while this morning...

Brian

[SDnative]

I heard on 7/39 this morning, that the Harris fire went a little south of the border, but since it was not too bad, the Mexican fire services were sending some of their units to help in Escondido or elsewhere.

[offsite]

Anyone know what frequencies and talkgroups are being used on these incidents Any help would be gladly appreciated

Just set up the new Air/Ground freq this morning:

170.000