Page 1 of 1
Help with my BCD996T
Posted: Sat Oct 13, 2007 10:27 am
by Eric Beheim
Like many new BCD996T owners, I’ve become more than a little frustrated trying to figure out how to use it with only the instruction manual as a guide. (Ideally, at some point, someone will come out with a third-party BCD996T FOR DUMMIES book.) In the meantime, can anyone tell me if there is a Uniden dealer in the San Diego area who is willing to work with me to (a) insure my scanner and laptop are talking to each other correctly and (b) show me how to program in the East San Diego county police, fire, and rescue frequencies that I want to listen to? I'd be willing to pay for such a service if it is available.
Eric in Descanso, CA.
Posted: Sat Oct 13, 2007 3:58 pm
by PStuart
Mudshack in El Cajon will program you up for about $50. I personally recommend working through it yourself with assistance from the forums. You really just have to get the hang of it
Posted: Sat Oct 13, 2007 7:27 pm
by Steele
Hi Eric, just PM Bud (Control) he is a Member and Moderator
On these Forums, and he can help you for a lot less.
He will get you going, and show you the basics.
Steele 8)
Posted: Sun Oct 14, 2007 5:17 am
by HOGCAT
If you need the help
Posted: Tue Oct 16, 2007 11:18 am
by dangitdoug
I do not own a 996, but I am fairly familiar with programming most scanners. I am in El Cajon. If you like I would be willing to drive up and look at your setup in person and try to help.
Let me know.
Doug K
