Page 1 of 1
pro-96 programming
Posted: Tue Sep 25, 2007 1:01 pm
by dan0077
I have a Radio Shack PRO-96. I need to program National City Police into it. I have the ID numbers such as 37904 37920 etc. Can someone walk me through getting these talk groups input?
I'm totally confused.
Posted: Wed Sep 26, 2007 2:35 pm
by mike
I own a pro 96 and I program it by hand first I program the control channel frequencies and to insert a talkgroup I push the PGM button on the scanner and then I hit the TRUNK button and then I enter the ID and to add the text name to the ID I stay in that same mode and hit the button that says TEXT to enter the text name of the ID.Anyway let me know if this helps.
pro 96
Posted: Wed Sep 26, 2007 3:43 pm
by dan0077
how do i get the control freqs for national city police
Re: pro 96
Posted: Wed Sep 26, 2007 3:53 pm
by n2deep
dan0077 wrote:how do i get the control freqs for national city police
National City is on the RCS. Program in the South Zone Control Channels
http://www.radioreference.com/modules.p ... RR&sid=499
pro 96
Posted: Wed Sep 26, 2007 7:54 pm
by dan0077
once i enter the control freq will the scanner find the talk group id?. or am i supposed to enter the indiv frequencies for the control??? .
Posted: Thu Sep 27, 2007 2:25 pm
by mike
These are the control freqs once you program them into your scanner you can push the scan button if you want and if you want the bank to be open it will display all the talkgroups that are being active at the time on the scanner and if you have it in closed mode it will only scan the ID's you program in it.
867.91250 868.07500 868.13750 868.41250