RCS tracking system?

[seargentslaughter]

What kind of tracking system is the county on? I dont remeber if its motorola type I or II
And is it all on the systems or is some on EDACS of a UHF system(s)?

[SDnative]

RCS is entirely a Motorola Type II and should be programmed as a "splinter" system.

[seargentslaughter]

Whats a splinter system? On my scanner it can only be programmed as: EDACS, something VHF Hi, something VHF Lo, and moto type 1 and 2

[SDnative]

I don't know about your scanner, but you should have a choice when you enter the trunk frequencies to use 800 standard or 800 splinter.

[seargentslaughter]

no i just have 800 i think

[n2deep]

Try to use this easier to read manual for your scanner....

http://marksscanners.com/94/94.shtml

[seargentslaughter]

ok! thanks and i should use motorola type 2 800mhz right?

[n2deep]

ok! thanks and i should use motorola type 2 800mhz right?

yes

[seargentslaughter]

ok thanks

[Control]

[quote="SDnative"]I don't know about your scanner, but you should have a choice when you enter the trunk frequencies to use 800 standard or 800 splinter.[/quote]

Only newer trunkers have that choice, BC235 and 245, even the 250 and 780 have just Type II 800.

And the RCS South Zone isn't a splinter system, it's standard.