UNIDEN 996T

This is the place to discuss generalized scanner questions and information for San Diego County. Whether it's radios, antennas, or other general scanner related topics, you can talk about it here.
Post Reply
HOGCAT
Posts: 17
Joined: Fri Jun 03, 2005 9:15 am

Post by HOGCAT »

I am getting it down, I think. Seems to have taken the TAC channels OK. I guess (tell me if I am wrong) you do not need to mess with the "HEX" numbers. Seems like just the TG number in it seems to work on the 996. I see no where in the operators manual about the "HEX" numbers.
Top
w6pix
Posts: 338
Joined: Wed Dec 31, 1969 4:00 pm

Post by w6pix »

HOGCAT wrote:I am getting it down, I think. Seems to have taken the TAC channels OK. I guess (tell me if I am wrong) you do not need to mess with the "HEX" numbers. Seems like just the TG number in it seems to work on the 996. I see no where in the operators manual about the "HEX" numbers.
No, disregard the hex numbers for scanners.
Top
HOGCAT
Posts: 17
Joined: Fri Jun 03, 2005 9:15 am

Post by HOGCAT »

I'm getting the hang of it now. Got the BUTEL software today. Thought I would give it a try. Seems a bit easier than the Uniden software. I think in a couple of years I will figure the whole thing out. I at least got the conventional channels and the trunked system installed for the Sheriff and CHP working!! But as far as "BANKS" and different groups, still trying to figure that out!
Top
31
Posts: 80
Joined: Sat Oct 30, 2004 8:13 pm

ARE YOU Up and RUNNING?

Post by 31 »

If not contact me via private post and I can make you 10-8
Top
Post Reply

Return to “Scanning Discussions”