Page 1 of 1

SDPD + Fire + BCT15x

Posted: Fri Mar 03, 2023 10:30 am
by wizard99
I've been away for awhile and decided to get back into listening and know many radio systems have been upgraded here in SD. I have a BCT15x and use FreeScan, and wondered if this gear is still capable of monitoring SDPD + Fire? If so, any hints to obtain channels and program are appreciated!

Cheers...

Re: SDPD + Fire + BCT15x

Posted: Fri Mar 03, 2023 2:15 pm
by mike
If it is capable of doing 700 MHz trunked system's and eventually phase 2 trunked then it would work.

Re: SDPD + Fire + BCT15x

Posted: Sat Mar 04, 2023 8:54 am
by wizard99
Thank you Mike for that fast reply.... its appreciated...

I'll pull up some 700mhz SDFD Freq's and test that out...

Re: SDPD + Fire + BCT15x

Posted: Sat Mar 04, 2023 12:40 pm
by wizard99
Is Radio Ref. the only source to download Frequencies... in my case for San Diego? I'm rustier in programming than I thought and with the added complexity of Trunking and Splinter I may be needing some easier method to accomplish what I might be able to reach from my location.

Re: SDPD + Fire + BCT15x

Posted: Sat Mar 04, 2023 3:24 pm
by mike
You can find the frequencies here, I would not recommend radioreference, they are way behind and slacking as far as updated information due to how their site is run now and corrupted,most updated radio info can be found here for the San Diego county region.

Re: SDPD + Fire + BCT15x

Posted: Sat Mar 04, 2023 3:28 pm
by mike
Try here for frequencies,

The frequencies in red are control channel's and the blue alternate control channels.
viewtopic.php?f=22&t=1472


To note the 800 MHz analog/digital system is still active with some stuff but most are on the 700 P25 system.